For the delivery of fuel oils, lube oils, hydraulic oils or other lubricating liquids. The fluid media must not contain any abrasive particles nor attack the pump materials chemically.
SPF pumps operate as transfer, booster and burner operation pumps in fuel oil engineering, as transfer and filling pumps in tank farms as well as lube-oil pumps in any industrial branches. They are moreover used for pressure generation in oil-hydraulic plants of all kinds.
SPF Series Triple Screw Pumps
| Capacity | up to 112 L/min 9@2900 rpm, 750 mm2/s) |
| Inlet Pressure | up to 5 Bar |
| Delivery Pressure | up to 40 bar |
| Viscosity Range | 3 to 750 mm2/s |
| Temperature Range | up to 150 degreec Celsius |
| Model Range | SPF 10 through to SPF 40 (No. indicates theoretical flow in L/min) |
General
Self-priming three-screw type of pump with internal bearing. The hardened and ground screws run in an exchangeable casing insert. The driving screw is hydraulically balanced. The axial thrust of the working screws is absorbed by the endside pump cover. Their drive is hydraulic. The thread flanks merely transmit the torque resulting from the liquid friction. Thus, the thread flanks are practically stress-free and not subject to any wear. All sliding parts are lubricated by the delivery medium being within the range of full liquid friction. The radial and axial bearing of the driving screw with pump size 10 and 20 is by the balancing piston guided in the bearing ring, with pump size 40 by a groove ball bearing. A maintenance-free mechanical seal is provided as the shaft sealing.
Sealing chamber and suction chamber are interconnected by way of a return gallery. Thus, independently of the delivery pres-sure at the shaft sealing, only the suction pressure becomes effective. Complete units being supplied, the connection pump/driving motor is by a pump bracket with mounting foot.
Operation
Owing to a special profiling of the thread flanks, the three screws from sealed chambers the contents of which are axially and completely continuously shifted from the suction to the pump side of the pump as the screws turn. There will be no turbulence in spite of the screw rotation. The constant chamber volume excludes squeezing. Noise/Pulsation The structural design and operation of the screw pump ensure a very low noise level and an almost pulsation-free delivery.
© 2017 PumpPower. All Rights Reserved.
Designed and Developed by 
